Lines per inch (LPI) is how fine the halftone dots are on your film. Choose it from your mesh, because a screen can only hold dots as fine as its threads allow.
Here is the same 4-inch sample at four rulings, with round dots at 22.5°:




The rule of thumb
Film LPI is about the mesh count divided by 4 to 5. A coarser mesh needs a coarser halftone. Halftoned uses mesh divided by 4.5, rounded, and keeps the result between 20 and 120 LPI. For any mesh count, use the LPI calculator, or make a one-color film at that ruling with the free halftone generator.
| Mesh | Suggested LPI | Starting dot range |
|---|---|---|
| 86 | 20 | 5% to 92% |
| 110 | 24 | 5% to 92% |
| 156 | 35 | 5% to 92% |
| 200 | 44 | 3% to 95% |
| 230 | 51 | 3% to 95% |
| 305 | 68 | 3% to 95% |
The dot range is the smallest and largest dot the screen can be expected to hold. It is a starting point, not a measurement: coarse mesh has a harder time holding a tiny highlight dot open and keeping a heavy shadow dot from bridging. Replace it with what your own screens hold. See find your printable dot range.
The same rule on one photo at 24, 35, 51 and 68 LPI (more video lessons):
What goes wrong when it is too fine
Highlight dots wash out and shadow dots bridge into solids. You find out after you have burned the screen, which is why it is worth choosing from the mesh first.
What goes wrong when it is too coarse
The dots show. A coarse halftone on a fine mesh prints, but the pattern is visible from farther away and fine detail breaks up. If the mesh can hold more, use it.
By job type
- Simulated process on dark shirts: 45 to 55 LPI is the usual window, on mesh that can hold it. See simulated process on dark shirts.
- One-color halftones and spot tints: follow the mesh rule.
- Index: no LPI. The dots are a fixed size, set in dots per inch: 180 dpi suits 230 to 305 mesh. See index separations.
Angle
Keep the dot grid off the mesh weave. A screen angle of 0° or 90° lines the dots up with the threads and produces mesh moiré. A 22.5° angle keeps the grid off the weave. See halftone angles and moiré.
Film resolution
Print the film at 720 dpi for crisp dot edges. 360 dpi is enough at 55 LPI and below. Go to 1440 dpi for fine type and rulings over 85 LPI.
In Halftoned
Pick the mesh you own and the ruling, minimum dot and maximum dot follow. See the pricing or the preview.