This page is for a shop that already makes films with AccuRIP, FilmMaker, Emerald or a similar RIP and wants to know what carries over and what is different. It covers what Halftoned does; for how your current RIP names things, use its own manual.
What is the same
- The screen. Ruling in lines per inch, angle, and dot shape are the same ideas. Round, ellipse, line and square dots are all there. Put in the ruling and angle your screens were burned with.
- The mesh rule. Ruling is about the mesh count divided by 4 to 5. Pick your mesh in any tool and the ruling and printable dot range follow.
- Exact size. A film is a PDF page (or a PNG that declares its dots per inch) at exactly the print size.
- Registration. Separation films carry identical registration marks, a label strip and a scale-check ruler.
What is different
There is no print driver in the middle. Most RIPs sit between the design program and the printer. Halftoned does not: it makes a file and you print that file through the printer's own driver, at 100% / Actual Size. This is why any printer that prints a PDF will work, and why the driver settings matter: color management off, the film or transparency media preset, Color Density raised, and no fit-to-page. The printer list has the maker's recipe where one exists.
You print a file, not from the design program. Save a PDF (or SVG) from Illustrator or CorelDRAW and load that. Illustrator files saved with PDF compatibility load directly. If your design program can print separations to PDF, one page per plate, Halftoned loads that as a set of plates and prints each as it is.
Black firing and droplet weight stay in the driver. A web app cannot reach those. Where your old RIP could force the printer to fire only black, you get the same effect from the driver's own black-only mode and its Color Density. The Dmax target tells you whether the film blocks light.
Your measured press goes in the app. Instead of a RIP's dot-gain curve, print the step wedge from the Calibration page, read the printed tints, and enter them. Every tool then offers Measured under Press and carries the film through the inverse. Feed calibration (the paper-feed correction) is per printer.
Doing it
- Set up the shop. Pick your printer on the Printers page, then work through the steps on the Calibration page: the Dmax bar, the step wedge, and the 10-inch scale target.
- Recreate one job you know. Load its artwork, set the ruling, angle and dot shape you used, and size it.
- Check it against the old film. Print it, lay the new film on the old one, and compare dots, size and registration marks.
- Burn a test screen before a real run. A film from a different RIP is not dot-for-dot the same film, even at the same ruling. Do not expect a reorder to register against screens burned from another RIP's film. Burn new screens for a job you are moving over.
Bringing existing separations
If your separations already exist, you do not have to separate again.
- A PSD whose channels are the plates, or a TIFF with spot channels, loads as a plate set.
- Per-plate files (one per ink) load together.
- A separations PDF with one page per plate loads as a set.
Each plate prints as it is, screened at the ruling you choose. For another RIP that screens the separation itself, export the set as an unscreened PSD or TIFF, or each film as a 1-bit EPS for a hot folder.
Reorders
Halftoned records the engine that made each job's films. A job opened on a newer engine says so, and What's new says whether films changed. Jobs made in another RIP have no such record: treat the first Halftoned film of an old job as a new film.