A halftone is easy in the middle. In the lightest tones each dot is a speck, too small to print. In the darkest tones only small clear gaps are left, and they close up with ink. Jupiter, screened at 35 lines per inch, shows both.
Print a step wedge, read the first and last steps that survive, and set that range on the film. Here it is 6 to 88%, an example of what a wedge might show, not a recommendation. The cost is a little contrast.
The films are rendered by the Halftoned engine. The shots marked "Model" show what a screen that holds dots from 6 to 88% would keep of the film.
Image: NASA/JPL-Caltech/SwRI/MSSS/Gerald Eichstädt/Seán Doran.
In this video
- 0:00 The trouble at both ends
- 0:23 Shadows fill in
- 0:37 Read a step wedge
- 0:49 Set a dot range
- 1:14 The trade
The written guide
Find your printable dot range with a step wedge: Measure the smallest and largest halftone dot your screens hold with a step wedge, in the right order: film density first, then the wedge, then printer scale.
More video lessons
- Mesh count and LPI: how fine a halftone can your screen hold? (1:33)
- Black generation in CMYK screen printing: two ways to print a gray (1:34)
- How many inks does simulated process need? Same photo at 3, 4, 6 and 8 screens (1:28)
- Color theory for screen printers: Josef Albers and the halftone (1:50)
- Screen printing beyond the halftone dot: 16 screen types on real film (2:30)
- Photo to film positive: one white ink on a black shirt (1:36)
- Free halftone generator: photo to screen printing film (1:09)
Every lesson in one place: screen printing video lessons.